Battening the Van and Building Some Bench Frames | Idiot's Guide | DIY Sprinter Van Conversion UK

Before I could think about cladding the van, I first needed to fix into place some upright battens to the metal interior of the van that I can fit the cladding to. I also wanted these battens to be thick enough so that some of my wiring that run between my insulation and cladding. I needed to also make some frames for my two benches in the van as they’ll house the majority of my electrics and a small diesel heater. If you have any questions feel free to leave a comment below. Link to Blog for more info: https://www.greenhorncountryclub.co.u... Materials used: Timber Battens 12x32x2100mm - https://www.wickes.co.uk/Wickes-White... Timber Battens 18x44x2400mm - https://www.wickes.co.uk/Wickes-White... Drywall Screws - https://www.wickes.co.uk/Wickes-Drywa... 2x2 Timber 34x34x2400mm - https://www.wickes.co.uk/Wickes-White... Wood screws 5x70mm - https://www.wickes.co.uk/Spax-Pz-Coun... Wood screws 4x45mm - https://www.wickes.co.uk/Spax-Pz-Coun... TOTAL SPEND: £141.75 You can now see a full breakdown of costs here: https://www.greenhorncountryclub.co.u... More content at: https://www.greenhorncountryclub.co.uk Follow on Instagram: https://bit.ly/3sEasQG Chapters: 0:00 - Intro 2:26 - Battening 2:48 - Window frame 5:24 - Bench framing intro 7:43 - Cutting 8:03 - Joining 10:21 - Fixing to the van 11:27 - End result