Furnace No HEAT...No FLAME | Quick Fix | DIY (Ep:#4)

So... your furnace comes on and blows, but you have no heat. The fix is simpler than you think. Step (1) TURN OFF THE THERMOSTAT Step (2) Locate you furnace Step (3) Look for the flame sensor which is located behind the first burner and held in place with one screw. CAREFULLY remove the screw. You don't want to lose the screw or drop the sensor because it will break. NOTE: if you break it, it can be replace from Amazon, for less than $20.00 but in the cold weather who can wait for this part to be delivered? Step (4) use a fine sand paper to clean the sensor, then dust off and re-install in the original location. Step (5) turn the thermostat on and wait for the igniter to glow. Once it senses flame from the burner it'll ignite and a message to the the other burners to stay on. Hi my name is Joe, I love to try new adventures and I love to find solutions to problems. I'm your most favorite DIY NON-Expert :) ON this channel I do DIYs for repairs to stuff around the house. I share with you how I do my different wood art and I'll share some meals with you. I love to sing and I'm learning to play the guitar so I'll share some of my music with you. My Family Cooking Channel    / @thebarepantryshow   My Daughter's Channel    / @jadajulianne