How to Replace Rear Strut and Spring Assembly 2006-2013 Chevrolet Impala
Buy Now! New Strut & Spring Assembly Set from 1AAuto.com https://trq.video/ib-1ASSP01469 New Strut & Spring Assembly from 1AAuto.com https://trq.video/ib-1ASTS01412 New Strut & Spring Assembly from 1AAuto.com https://trq.video/ib-1ASTS01413 This video shows you how to install a rear strut and spring assembly on your 2006-2013 Chevrolet Impala. TRQ Struts are made to fit your vehicle exactly, just like the original part. Struts can wear out as early as 50,000 miles. You should inspect them regularly for leaks or wear. Save time, money, and hassle by replacing an entire strut assembly. This repair was done on a 2009 Chevrolet Impala LT 3.5L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles: 2006 Chevrolet Impala 2007 Chevrolet Impala 2008 Chevrolet Impala 2009 Chevrolet Impala 2010 Chevrolet Impala 2011 Chevrolet Impala 2012 Chevrolet Impala 2013 Chevrolet Impala Tools you will need: • 15mm Wrench • 18mm Wrench • 14mm Deep Socket • 15mm Socket • 19mm Socket • Ratchet • Torque Wrench https://trq.video/oU8-1AXAA00044 • Gloves https://trq.video/otU-1AXSS00048 • Safety Glasses • Floor Jack • Wheel Chocks Subscribe: / @trq Check out our playlist: Chevrolet Impala 2006-2013 9th Generation: • Chevrolet Impala 2006-2013 9th Generation ⚠ DISCLAIMER: While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
