Lecture 27 | Design steps || Uni-axially loaded Column || SP16

The design steps of a Short uni-axially loaded column are discussed using SP-16. Recommendations of IS:456-2000 and SP:16-1980 have been incorporated in the design methodology i.e., Limit State Design Methodology. ------------------------------------------------------------------------------------------------------------------------------ #SP16 #ShortUni-axiallyLoadedRCCColumn. #ChartsSP16 #InteractiveCharts #InteractiveCurves ------------------------------------------------------------------------------------------------------------------------------- #Lecture27 #DesignSteps #Uni-axiallyLoaded #RCCColumns #SP-16Charts -------------------------------------------- Chapters : 0:00 Introduction 1:25 Start of the methodology 6:04 Step 1 : Selection of Materials 6:24 Step 2 : Factored Load and Factored Bending Moment 6:44 Step 3 :Selection of Trial Section 7:20 Step 4 : Check for Minimum Eccentricity 9:27 Step 5 : Calculating parameters required for the selection of SP 16 Charts 10:40 Step 6 : SP 16 Charts discussion 19:58 How to use Charts in SP 16 30:35 Subscribe Channel ========================================================== Lecture 26 (   • Lecture 26 | Design Problem || Short Axial...  ) The design problem of a Short axially loaded CIRCULAR SPIRAL column is solved. Recommendations of IS:456-2000 have been incorporated in the design methodology i.e., Limit State Design Methodology. Lecture 25 (   • Lecture 25 | Design Problem || RCC Axial R...  ) covered: The design problem of a Short axially loaded RECTANGULAR column is solved as per #LimitStateMethod in accordance with the recommendations of IS:456-2000. Lecture 24 (   • Lecture 24 | Design Problem || RCC Short A...  ) covered: The design problem of a Short axially loaded SQUARE column is solved as per #LimitStateMethod in accordance with the recommendations of IS:456-2000. --------------------------------------------------------------------------------------------------------------------------------------------------------------- Lecture 23 (    • Lecture 23 || Design of RCC Columns || IS ...   ) covered : The important points such as #Assumptions in the design of RCC Columns #Minimum Eccentricity #Cover to reinforcement #Longitudinal Reinforcement and #Transverse Reinforcement #LateralTies and #Helical_ties are explained in reference to guidelines mentioned in #IS456_2000. #ReinforcedUni-axiallyLoadedColumn #ShortColumn #DesignStepsSP16