How to replace the Upper Control Arms 2009-2018 Dodge RAM 1500 🚗
Find the parts used in the video on CarParts.com just there https://carparts.solutions/RAM1500 ⚙️ NEEDED CARPARTS AND PRODUCTS Upper control arms : https://carparts.solutions/UpperContr... and https://carparts.solutions/UpperContr... Penetrating oil Silicone grease 💪 TIGHTENING TORQUES Upper control arm holding bolt : 130 Ft-lbs Upper control arm ball joint : 40 Ft-lbs Additional 200 degrees 🛠 TOOLS The toolbox recommended by CARPARTS.COM to repair your Dodge RAM 1500 : https://carparts.solutions/ToolBox List of the tools we used to replace the upper control arms on a Dodge RAM 1500 : Measuring tape Hydraulic jack : https://carparts.solutions/FloorJack Jack stands : https://carparts.solutions/JackStands Wheel lug wrench Ratchet 21mm socket 13/32” socket Hammer Wire brush Fork 18mm wrench X2 Torque wrench : https://carparts.solutions/TorqueWren... Don't forget to subscribe : / @carpartscomofficial 🛻 COMPATIBLE VEHICLES The operation and tools displayed in the video should be available on the following vehicles : 2009 RAM 1500 2010 RAM 1500 2011 RAM 1500 2012 RAM 1500 2013 RAM 1500 2014 RAM 1500 2015 RAM 1500 2016 RAM 1500 2017 RAM 1500 2018 RAM 1500 📽 🛠 USEFUL VIDEOS 🛠 📽 How to jack your Dodge RAM 1500 safely : • How to jack your 2009-2018 Dodge RAM 1500 ... ⚠️ CARPARTS.COM'S INFOS Before lifting your vehicle, it is necessary to measure the distance between the centre of your wheel and the wheel arch. This will allow you to achieve an optimal tightening of the silentblock equipped elements in their initial position. In order not to cause damage, it is necessary to tighten the front retaining bolts in the "vehicle on the ground" position. During this operation, you will be intervening on the front axle of your car, so it is advisable to perform a wheel alignment afterwards. 🚨 DISCLAIMER This video is for entertainment purposes only. Carparts.com, Inc. disclaims all damages including, but not limited to, actual, consequential, and/or punitive, for any liability, claim, or any other injury or cause related to or arising from any information or lack thereof posted in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All mechanical car projects entail some risk. It is the sole responsibility of the viewer to assume this risk. If you are in doubt, please consult a licensed mechanic in your area. 📚 CHAPTERS 0:00 Intro 0:10 Measure the distance between the center of your wheel and the wheel arch 0:30 How to pull up your RAM 1500 1:06 Remove the control arm ball joint 1:46 Remove the upper control arm holding bolts 2:53 Install the upper control arm holding bolts 3:34 Put the control arm ball joint into the wheel knuckle + tightening torque 4:11 Tighten the upper control arm holding bolts + tightening torque 4:49 Put your RAM 1500 back on the ground + saftey tips
