Concealment coffee table with three different locks (start to finish)

Youll find the cut list below to follow along with this gun concealment coffee table. I designed this coffee table since the others I have seen have a few obvious signs that something is off. Like holes in the apron for the drawer slides to move back and forth. So this one is designed with a sliding apron, that really quite effectively hides the fact that this is anything but a coffee table. ***If you want a deeper concealment area, use 2x6 instead of 2x4 for the aprons. This will give you 2 more inches of usable space. Buy plans here: https://coopandgardenfarms.etsy.com/l... 📝Cut list: Table top: 45"x27"x3/4" (you can use a thicker table top if desired, just make changes to Magnet lock) 4x Legs 16" x 3" x 1.5" 1x Sliding Long Apron 38.5" x 3" x 1.5" 1x Fixed Long Apron 38.5" x 2 7/8" x 1.5" 2x Short Aprons 18" x 2 7/8" x 1.5" 2x Short Stretchers 18" x 1.5" x 1.5" 2x Long Stretchers 38.5" x 1.5" x 1.5" 2x Drawer Slide Pieces 20.5" x 1.5" x 1.5" 1x Bottom piece Length: Same as long apron Width: Must measure between fixed and sliding apron 🧰Hardware and tools used: 20" Drawer slides: https://amzn.to/4aAZcsy Stainless steel spring loaded latch: https://amzn.to/3WRkPSk Strong Magnet: https://amzn.to/4awsjNN Steel dowels: https://amzn.to/3KaI2rc 1/2" Forstner bit: https://amzn.to/4bRveBE RFID Lock: https://amzn.to/44RGPhX Massca Pro M2 pocket hole jig: https://amzn.to/3wMMPvM 2.5" pocket hole screws: https://amzn.to/4blwehH Cuttable Kaizen Foam: https://amzn.to/4bNSi4r Gun Stock Wood stain: https://amzn.to/4dSIbgj Chapters: 00:00 Intro 00:48 Cut List and Wood Prep 02:25 Leg Assembly 03:17 Pre Sanding 03:40 Decorative Option In Legs 04:25 Installing Stretchers, Fixed Apron 04:47 Making Table Top 05:32 Staining 06:08 Installing Drawer Slides 07:05 Cutting, Installing Sliding Apron 08:00 Installing Spring Loaded Latch 08:58 Installing Magnet Latch 10:17 Installing RFID Lock 11:05 Cutting, Installing Bottom Piece 12:07 Cutting Manual Latch Access Hole 12:21 Finish Up Magnet Latch 13:29 All done, Other cool things