Which Voron should you build?

In this video I cover the Voron 2.4, Trident, and briefly the V0 along with similarities, differences, and considerations. Voron is an open source printer, born out of RepRap. IMHO, it is one of the best quality printer you can build that has a large community behind it. Watch the video to learn which one would work best for you! Voron Design - Link to all Build Docs & Info: https://www.vorondesign.com/ My Voron 2.4 kit was from West3D. West3d Voron Kits (including LDO): https://west3d.com/GREGSMAKERCORNER All Trident parts were provided by Boxxy Prints. Kit was provided by LDO. Boxxy Prints (Recommended for parts, tell him I sent you!) https://boxxyprints.com/?v=0a10a0b3e53b Considering a Voron Trident? Check out my LDO Trident Kit Review here:    • LDO Voron Trident Kit Review   See below if you'd like to skip around the video. 00:31My Voron 2.4 R2 Build 00:56 My Trident Build 01:40 Stealthburner Toolhead 01:56 Trident Touch Screen 02:00 Voron 2.4 Voron display 02:21 Voron 2.4 Flying Gantry 02:37 Trident Fixed Gantry 02:54 Voron 2.4 and Trident Bed Comparison 03:11 - Voron 2.4 and Trident Gantry Similarities 03:31 - Voron 2.4 and Trident Cable Chain Differences 03:44 - Voron 2.4 and Trident Z Motor Mounting Differences 03:59 - Trident Lead Screws 04:10 - Auto Leveling 04:20 - Voron 2.4 Quad Gantry Leveling 04:34 - Z Endstop for Z offset (Both Machines) 04:52 - Trident Z Tilt Leveling 05:15 - Auto Leveling Process & Differences 05:45 - Enclosure Panels (Same on Both Machines) 06:21 - Bottom Cooling (Same on Both Machines) 07:00 - Print Quality (Same on Both Machines, but some considerations) 08:08 - LGX Lite Extruder good for TPU (Mods for both machines) 09:16 - Preheating 09:59 - Print Speed Comparison 10:37 - Toolhead Considerations 11:17 - Build Considerations 12:44 - Popularity / Mainstream Support 13:05 - Serial Numbers 13:18 - Pricing Differences 13:32 - Kits 14:19 - Voron 0.1 15:58 - Printing on each machine 16:22 - Conclusion Learn more about the Titanium Backers "theory" here: https://github.com/tanaes/whopping_Vo... Here is a video on how to install them:    • Voron 2 4 Gantry Install, Titanium Backers...