How to Replace MAP Sensor 08-12 Jeep Liberty

For More Info visit us at: https://trq.video/h-b7g The Manifold Absolute Pressure (MAP) sensor measures the air coming into your fuel injected engine to determine how much fuel to add to get the right mix. A failing or failed sensor will contribute to rough or inefficient running engines. It will likely also trigger a check engine light. Replacing a failed sensor should be a priority. This video shows you how to install a new MAP sensor from TRQ that is designed to perfectly fit your 2008-12 Jeep Liberty. • Check here for more videos on the 2008-12 Jeep Liberty:    • Jeep Liberty 2008-2012 2nd Gen   This repair was done on a 2008 Jeep Liberty and the process should be similar on the following vehicles: 2008 Jeep Liberty 2009 Jeep Liberty 2010 Jeep Liberty 2011 Jeep Liberty 2012 Jeep Liberty Tools you will need: • 13mm Socket • 14mm Socket • 15mm Socket • Serpentine Belt Tensioner Tool https://trq.video/obA-1AXAA00019 • 9/32 Inch Socket • Ratchet • Socket Extensions Subscribe:    / @trq   Check out our playlist: Jeep Liberty 2008-2012 2nd Gen:    • Jeep Liberty 2008-2012 2nd Gen   📱 Download the TRQ Auto Repair App for more videos, torque specifications, and car repair information: https://trq.video/appdownloadyt ⚠ DISCLAIMER: While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. Note: As an Amazon Associate we earn from qualifying purchases.