check tyre pressure monitoring system in creta /how to tyre pressure sensor repair

You’re asking about the “Check Tyre Pressure Monitoring System” warning in Hyundai Creta. Here’s the detailed guide 👇 Why It Shows Low tyre pressure (most common) Puncture / slow air leak Faulty TPMS sensor (battery weak, internal fault) Sensor not detected after tyre change/rotation System needs reset ✅ What To Do (Step by Step) 1. Check Pressure Look at the driver-side door sticker for the recommended pressure. Creta (most variants): 33–35 PSI (front & rear). Check all 4 tyres (and spare if it has TPMS). 2. Inflate Correctly Fill tyres to correct PSI. Drive for 3–5 minutes above 30 km/h → light should go off automatically. 3. If Warning Stays On Possible TPMS sensor issue. A scan tool will usually show a code like: C112100 → Front Left Sensor Battery Voltage Low Others may indicate communication or pressure faults. 4. Reset / Relearn TPMS (if required) In Creta, there is no manual reset button. System resets automatically after correct pressure + short drive. If not → needs OBD scan & reset at service centre. 5. Sensor Replacement (if faulty) Each TPMS sensor has an internal battery (life ~5–7 years). If battery dies, the whole sensor must be replaced. ⚠️ Tip: If you often see “Check TPMS” even when pressure is correct, it’s likely a weak/faulty sensor. 👉 Do you want me to give you the exact TPMS DTC (fault code) list for Hyundai Creta, so you can match the warning with the error?