How to Build a HINGED HOOP HOUSE for a Raised Bed

In this video I'm showing you how to make a simple DIY hinged hoop house for a raised bed. Check out the School Of Traditional Skills: https://bit.ly/3zoFWy1 Video: How to Make a Simple, Cheap Raised Bed:    • How to Make a Simple & Cheap Raised Bed   Hoop House Frame Parts List: • Two 8 Foot Long 2 x 4’s- These will form the length of the hoop house. • Two, 41 Inch 2 x 4’s - These will form the width of the hoop house. • 3 Inch Decking Screws - Use these to attach the boards to the frame firmly. • 4 "L" Brackets • 1⁄2 Inch PVC - This will form the arches of the hoop house. • 6 End Caps for 1⁄2 Inch PVC - These will hold the PVC frame in place on your hoop house frame. • Coated 1 5⁄8 Inch Screws - Use these to attach the end caps to the frame. • 1⁄2 Inch PVC T-Connectors - Used to connect the four pieces of each arch of the hoop house. • PVC Cross Connectors - Use for the center arch of your hoop house. • PVC Cutter - Use to cut the PVC pipe into 16-inch pieces. • Two 8-foot Long Furring Strips - Used to hold the plastic covering to the frame of the hoop house. • Two 43 Inch Furring Strips - Used to hold the plastic covering to the frame of the hoop house. • 10 Foot by 25 Foot Roll of 6 Mil Plastic Sheeting - Used to cover the hoop house. • Two 3 Inch Metal Hinges - Used to attach the hoop house to the frame. • Handle - Any handle will work. This will make it easier to open your hoop house. • 2 Screw Eyes - Used to secure a rope between the raised garden bed and the hoop house frame. • Rope - Used to attach the frame of the hoop house and the frame of the raised bed.