Install: T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector on a 2022 Kia Telluride

Click for more info and reviews of this Tekonsha Custom Fit Vehicle Wiring: https://www.etrailer.com/Custom-Fit-V... Check out some similar Custom Fit Vehicle Wiring options: https://www.etrailer.com/fitguidet1.htm Search for other popular Kia Telluride parts and accessories: https://www.etrailer.com/vehicle/2022... https://www.etrailer.com Don’t forget to subscribe!    / etrailertv   Full transcript: https://www.etrailer.com/tv-install-t... Hi there Kia owners. Put in your 2022 Kia Telluride. We're going to be taking a look at and showing you how to install Tekonsha's 4-pole flat trailer connector vehicle wiring harness. And this is what our harness looks like when it's installed. We do have brackets available here at etrailer. I typically recommend a combination of a no-drill bracket and a 4-pole bracket. The no-drill bracket will allow you to clamp a bracket onto your hitch. And then you can mount your 4-pole to that bracket, so you don't have to drill into your vehicle at all. To get you a nice mounting for this connector. It doesn't need to be mounted, though. It works just fine, right here. You can see that there's not an access length where it's going to fall down. And when you're not using it, you can secure it to your hitch using the dust boot here. The dust boot keeps out dirt, debris, and moisture ensuring long lasting operation of our connection. We'll go ahead and take our dust cap off now. And we can see our four connections inside. It's going to include our left turn signal, right turn signal, tail lamps, and brake lamps. So we'll get all the necessary lighting signals at the back of our vehicle for our trailer, keeping us DOT compliant in all states. What I like about this harness is that it has a module that's integrated into the harness, and it's custom fit for our Telluride here. So it plugs directly into the factory connector. The module will then observe all the signals that it receives from that factory connector, and it will reproduce those signals and send them out our 4-pole flat trailer connector. What's nice about that is if the module detects any shorts or faults on our trailer, it can shut that circuit down to prevent any issues with the wiring on our vehicle. Now that we've covered some of the features of our wiring, why don't you follow along with me, and we'll show you how to get it installed. It's an extremely easy harness to install with it being custom fit for our vehicle. There's one panel we'll remove underneath here. And this is something you should probably have done in about 20 minutes at home. We'll begin our installation underneath the vehicle. Our connector for our wiring that we're going to plug into is going to be located underneath the panel, here. To remove this panel, we'll have three clips here at the bottom, we'll just pop those out with our flat-bladed screwdriver. There's a little notch and like kind of a plus shape about it. you'll see those little notches. Choose any one of them and just stick your blade in there. That'll just pop it right out. After we remove these three, we'll grab our 14 millimeter socket to remove the two plastic nuts holding the panel in place. They're up in these kind of curved areas here. And with these plastic panels, to get these removed, we're going to give it a slight downward pressure. That'll help work, walk it right down the threads. The same thing with the other one here. And then we can set this panel aside. Behind our panel here is our factory connector that we're going to plug our wiring into. So we can go ahead and remove the cap from it. It's got a cap on there. That's the release tab, you can press on that and then pull the cap off. We'll then, take our new harness here. This is our custom fit harness. It's got a connector that will plug directly into our factory connector here, making this an extremely quick and easy installation. At that point, your wiring is functional. But, we're going to go ahead and clean things up. You're going to get some zip ties in your kit, as well as some double-sided adhesive. So we can get this module mounted. We'll just open up the little bag here. And we'll get that attached. What I'd like to do before mounting the module is I like to take the 4-pole wiring here and go ahead and get this undone. That way we can kind of route it towards the center of the hitch. So that way, when we mount our module, we don't accidentally mount the module in an area where it's too far away from the center and we don't get a very good length of wire left over to get there, so. Let's get this rubber band off of there. Kind of route the wire there. Just kind of go in above the hitch and it'll come out the bottom here. Make sure we got ourselves enough length to work with, that looks like a pretty good amount. We'll go ahead and secure it to our safety