etrailer | Breaking Down the Replacement Fan Blade for Ventline Ventadome Trailer Roof Vents

Click for more info and reviews of this Ventline RV Vents and Fans: https://www.etrailer.com/Accessories-... Check out some similar RV Vents and Fans options: https://www.etrailer.com/dept-pg-Acce... https://www.etrailer.com Don’t forget to subscribe!    / etrailertv   Full transcript: https://www.etrailer.com/tv-Demo-Vent... Today we're going to be taking a look at the Replacement Fan Blade for the Ventline Ventadome Trailer Roof Vents. It's going to work great for roof vents on motor homes and enclosed trailers. Again, it does work with Ventline Ventadome models V2094 and V2119, newer models only. The hole or bore diameter, that's the small hole right there. That's going to give us a measurement of 3/32 of an inch. When replacing this, this simply presses on, so it's a press fit installation. The product's made in the USA. Now this fan blade won't fit older obsolete motors. If you're Ventline roof vent has an older motor, it will have to be replaced along with the fan blade. To determine whether you have an old or new motor, all you need to do is measure the length of the motor from end to end, excluding the shafts and mounting hardware. You'd want to be sure just to measure just the case. If the motor measures 2 in, it's going to be an older motor and should be replaced with the fan blade. A new motor is going to measure 1 1/2 in in length. The diameter of the fan blade measuring edge-to-edge, that's going to give us a diameter measurement of about 6 in. That's going to do it for today's look at the Replacement Fan Blade for Ventline Ventadome Trailer Roof Vents.