How to Replace Inner Tie Rod 2007-2015 Mazda CX-9
Shop TRQ on 1AAuto.com Tie Rod Set https://trq.video/ia-1ASFK04582 Tie Rod https://trq.video/ib-1ASTE00827 Shop TRQ on eBay Tie Rod Set https://www.ebay.com/itm/232170041513... Tie Rod https://www.ebay.com/itm/232170508442... Shop TRQ on Amazon Tie Rod Set https://www.amazon.com/dp/B074815CZ3 Tie Rod https://www.amazon.com/dp/B09PVGBQT9 Shop TRQ on Walmart Tie Rod Set https://www.walmart.com/ip/TRQYouTube... Tie Rod https://www.walmart.com/ip/TRQYouTube... This video shows you how to install new TRQ outer tie rods on your 2007-2015 Mazda CX-9. Outer tie rods, sometimes referred to as “tie rod ends,” connect the steering rack to the steering knuckle. Their joints can wear out over time, causing loose steering, vibrations, and uneven tire wear. They are also a common failure point in localities with safety inspections. This repair was done on a 2007 Mazda CX-9 Sport 3.5L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles: 2007 Mazda CX-9 2008 Mazda CX-9 2009 Mazda CX-9 2010 Mazda CX-9 2011 Mazda CX-9 2012 Mazda CX-9 2013 Mazda CX-9 2014 Mazda CX-9 2015 Mazda CX-9 Tools you will need: • 13mm Wrench • 17mm Wrench • 21mm wrench • 22mm Wrench • 18mm Socket • 21mm Deep Socket • 21mm Socket • Inner Tie Rod Removal Tool https://trq.video/oaC-1AXAA00438 • Bent Nose Pliers • Needle nose pliers • Needle nose pliers • Ratchet • Socket Extensions • Torque Wrench https://trq.video/oast-1AXAA00044 • Pick https://trq.video/oHu-1AXAA00037 • Sledge Hammer Subscribe: / @trq Check out our playlist: Mazda CX-9 1st Generation 2007-2015: • Mazda CX-9 1st Generation 2007-2015 📱 Download the TRQ Auto Repair App for more videos, torque specifications, and car repair information: https://trq.video/appdownloadyt ⚠ DISCLAIMER: While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
