Packet Tracer Lab - How to Configure DHCP Server | Automatic IP Address Assignment #ccna #cisco

In this Packet Tracer lab, you’ll learn how to configure a DHCP Server to automatically assign IP addresses to network devices such as PCs and routers. We’ll walk through setting up the DHCP service, connecting devices, assigning IPs dynamically, and verifying network connectivity step-by-step. 🧠 Lab Setup Overview: PC1, PC2, PC3 connected to Switch Fa0/1, Fa0/2, Fa0/3 DHCP Server connected to Switch Fa0/4 Router Gi0/0 connected to Switch Fa0/5 DHCP Server IP: 192.168.10.5/24 📋 Steps Covered: 1️⃣ Network Topology Overview 2️⃣ Configure DHCP Server IP (192.168.10.5/24) 3️⃣ Enable DHCP Service and Configure Default Gateway 4️⃣ Configure Router Interface Gi0/0 with DHCP 5️⃣ Verify Router IP Assignment from DHCP Server 6️⃣ Configure PCs to Obtain IP via DHCP 7️⃣ Verify IP Assignment using ipconfig 8️⃣ Test Connectivity using ping 📌 Timestamps: 0:00 – Network Topology 0:35 – DHCP Server Configuration 1:25 – Router Configuration 2:45 – PC Configuration 3:15 – Check IP Configuration and Connectivity 📁 Key Learning: How DHCP dynamically assigns IPs How to configure DHCP Server in Cisco Packet Tracer Verify DHCP operation with router and PC clients Keywords DHCP configuration in Cisco Packet Tracer, DHCP server setup Cisco Packet Tracer, how to configure DHCP in packet tracer, DHCP explained, dynamic host configuration protocol, CCNA DHCP lab, router gets IP from DHCP server, DHCP tutorial, DHCP step by step, packet tracer networking labs, network automation labs, automatic IP allocation Cisco, how to assign IP automatically, DHCP configuration CCNA, DHCP practical example #CiscoPacketTracer, #DHCPConfiguration, #CCNALab, #NetworkingBasics, #PacketTracerLab, #CiscoNetworking, #RouterConfiguration, #DHCPServer, #CiscoTutorial, #LearnNetworking