How to Make an Arduino Ultra-Sound Parking Sensor with tinkercad

This video explain the complete circuit diagram that how I made it. If you want to learn about the code as well then check my next video where I explained the code as well. Connections: The HC-SR04 Ultrasonic Module has 4 pins, Ground, VCC, Trig and Echo. The Ground and the VCC pins of the module needs to be connected to the Ground and the 5 volts pins on the Arduino Board respectively and the trig and echo pins to any Digital I/O pin on the Arduino Board. The HC-SR04 sensor attach to the Breadboard The Sensor VCC connect to +ve terminal of breadboard The Sensor GND connect to the -ve terminal of breadboard The Sensor Trig connect to the Arduino Board Digital I/O 3 The Sensor Echo connect to the Arduino Board Digital I/O 2 Buzzer and LED The Buzzer attach to the Breadboard The Buzzer long leg (+) connect to the Arduino Board Digital I/O 6 The Buzzer short leg (-) connect to the breadboard -ve terminal The LED attach to the Breadboard The Resistor connect to the RED LED long leg (+) The Resistor connect to the GREEN LED long leg (+) The Resistor other leg (green) connect to the Arduino Digital I/O 4 The Resistor other leg (green) connect to the Arduino Digital I/O 5 The LED short leg (-) for both LED's connect to the Arduino Board GND Tinkercad link: https://www.tinkercad.com/things/132W... Code: https://drive.google.com/file/d/1v_Ss...