How to cut an LED strip? Connecting LED strips with connectors. Soldering an LED strip

How to cut an LED strip? Connecting 2 LED strips and soldering two LED strips ✅❤️10, 15, or 20m LED strip: https://amzn.to/3UCHfUP -------------------------------------------------------------------------------------------------------- ⭐ Top selection of the best high-density LED strips - Customer reviews and tests ✅ https://www.amazon.fr/shop/jeteste/li... ----------------------------------------------------------------------------------------------- ✅ 5m RGBIC COB LED strip: https://amzn.to/40RJiJq ✅ 10m RGBIC COB LED strip: https://amzn.to/4hOjmV1 ------------------------------------------------------------------------------------------------------- 🚀 BLOG https://choisirsonrubanled.fr/le-meil... ✂️ Standard LED strip connector (4-pin): https://www.amazon.fr/connecteur-band... 🌈 Neon LED Strip RGBIC 6m (non-cuttable): https://amzn.to/3K1PzIw Wired connector: https://amzn.to/3YbVRuW How to tell if you can cut an LED strip? (cuttable or not) To cut an LED strip, you must first identify the cut marks on the strip. These marks indicate where the strip can be cut without damaging the LEDs. You must cut at the copper connections; use scissors to cut the LED strip. ⚠️ Do not cut your LED strip unless necessary; there is often a risk of malfunction due to poor contact between the connector pins and the copper connections of the LED strip. Carefully check these connections with a magnifying glass if needed. To choose your connectors correctly, check the number of copper connections on your LED strip. Generally, there are 4, but there may be only 2. This is the case with COB LED strips. Therefore, for an LED strip with 4 copper connections, you will need connectors with 4 pins. ⚠️ Remember to connect the positive terminals indicated on the LED strip to the same side. As an Amazon Associate, I earn from qualifying purchases.