How To Use the Sphygmomanometer

How to measure with a mechanical blood pressure monitor will be more accurate?Please follow www.cnhealthshining.com,what'sapp:richard 0086-18658896852.The use of a manual blood pressure monitor emphasizes the following aspects: 1. Preparation before blood pressure measurement: rest quietly for more than 5 minutes before measuring blood pressure, try to avoid drinking strong tea and coffee half an hour before blood pressure measurement, take a sitting position, and choose a chair with a back as much as possible. When measuring, the legs naturally droop, do not overlap, the blood pressure monitor is at the same level as the heart, and the mercury column blood pressure monitor is turned on at this time. There is a button in front of the lid, open the button and push it open, and turn on the mercury column switch after pushing it open; 2. Problems that need to be paid attention to when measuring: If the blood pressure has never been measured, the left and right sides should be measured at the same time, and when the cuff is tied, let the lower edge of the cuff be 1-2 horizontal fingers away from the elbow fossa, that is, 2cm. It is advisable to put 1-2 fingers in it, do not wear too many clothes, at most one layer; 3. Problems that need to be paid attention to when deflating: inflating slowly during the inflation process, when the pulse cannot be heard, then rise about 20mmHg, and then slowly deflate. The first sound you hear is to measure the high pressure value of your blood pressure, and then gradually deflate, the speed of decline should not be too fast, drop by 2mmHg in 1 second, and when the sound disappears, it is diastolic blood pressure. During auscultation, the device of the stethoscope should not be tucked under the cuff, but placed in the position of the brachial artery in the cubital fossa. If need More information:https://www.cnhealthshining.com/blood-pres...