DHCP Server Configuration | Dynamic IP Addressing | Cisco Packet Tracer

In this video, I’ll show you how to configure DHCP (Dynamic Host Configuration Protocol) using a server in Cisco Packet Tracer. You’ll learn how to set up a server to assign IP addresses to end-devices (PCs and laptops), configure the router, and test the network by sending packets in real-time. #ciscopackettracer #dhcp #dhcpserver #packettracer #routerconfiguration #routersetup #packets #realtime #pc #laptop #server Static Routing Configuration:    • Static Routing Configuration | 3 Router 3 ...   Switch Configuration:    • Switch Configuration | IP Addressing | Pac...   Server and Webpage Configuration:    • HTTP Web Server Configuration | Packet Sim...   Router Configuration:    • Router Configuration | Packet Simulation |...   DHCP Configuration using Router:    • DHCP Router Configuration | Dynamic IP Add...   What You’ll Learn: How to configure DHCP on a server in Cisco Packet Tracer. Setting up a router and end-devices (PCs, laptops) to dynamically receive IP addresses from the server. Testing the network with real-time mode to verify IP assignment and connectivity. By the end of this tutorial, you’ll understand how to use a server for dynamic IP management and improve network efficiency. Timestamps: 00:00 Intro 00:06 Network Topology 00:46 DHCP Server Configuration 02:03 Router Configuration 02:52 Testing IP Address ssigning in End-Devices(PCs and Laptop) 03:14 Sending Packets in Real-Time Mode