How to Manually Override Auto Watch Immobilizer System to START Your Car and Add Another Key Fob

How to override an Auto watch immobiliser system, works with any autowatch system with the LED flashing light, i have completed on both systems with the button key fob and the proximity fob and it worked for both. The intention of this guide is to help vehicle owners get their car going in the event they lose or the fob fails. I lost mine 4WDriving and found it difficult to find instructions on what to do. This is for the N4086 / 674Ri series, but the code procedure with the LED is the same for many models with and without the remote locking button The basic procedure involves finding a 5 digit code stuck on the immobiliser box under the dash/footwell, (there is a cap with 2 screws) using this number to enter the code via flashes of the LED on the steering column/dash, each time the key is turned off the flashes represent a number in the code, enter each number and break them up by switching the key to the on position. After the final digit is entered, turn the key to on for a final time, and the ignition should turn on with the immobiliser disarmed. To code a new fob do the above procedure, once you have entered the last digit and the immobilizer is disarmed turn the key off and count 1 flash, then, turn the key to the on position and then off and count 1 flash. Turn the key on and press remote button and then repeat this again after 2 seconds. The LED will flash fast if it has worked. I hope this helps!